Glass repair in Hillsboro covers a wide range of issues: fogged windows with a failed seal, broken storefront glazing, cracked sliding door panels, damaged door glass, and rock chip repair on auto glass. Most repairs start with an on-site assessment, move to measuring and fabricating the right glass, and finish with a clean installation. We serve homeowners and businesses throughout Hillsboro, Beaverton, Cornelius, Forest Grove, and the wider Washington County area from our shop in Cornelius.
Start with the Right Diagnosis
The most common mistake homeowners and business owners make when they notice a glass problem is jumping straight to replacement before they know what is actually wrong. Replacement is sometimes the right answer. Often, it is not.
When your windows look fogged or hazy, that is typically a failed seal on an IGU (insulated glass unit, the sealed glass assembly inside your window frame). The glass itself is not broken. The seal between the two panes has failed, allowing moisture to enter and cloud the interior. A failed seal does not mean you need new window frames. It generally means you need a new sealed unit, measured and fabricated to fit your existing opening.
When glass is physically broken, a cracked sliding door panel, a shattered entry door light, a storefront pane with a stress fracture, the path is more direct. We assess whether the frame and hardware are still sound, measure the opening, and fabricate a replacement.
Knowing the difference matters for your budget and your timeline. That is why every repair job at Martin Glass starts with an honest look at what is actually there.
The Most Common Glass Repairs in Hillsboro
Here is what we see most often across residential and commercial calls in Hillsboro and Washington County:
Failed IGU seals. Windows that look fogged or hazy on the inside have a failed seal. The fix is a new IGU, not a new window. We measure the existing opening and fabricate a replacement sealed unit in-house.
Broken residential glass. A storm, an impact, or a failed window pane can leave you with broken glass in a frame that is otherwise in good condition. We assess the frame, measure the opening, and fabricate the right glass to fill it cleanly.
Sliding glass door panels. Sliding door glass can break or develop seal failures the same way any other IGU can. We also check the rollers and track during the assessment, because a door that is hard to slide or dropping off its track may need roller or hardware work alongside the glass repair.
Door glass replacement. Entry door lights, sidelights, and decorative panels can be replaced without replacing the whole door. We measure and fabricate to match the existing opening in clear, obscure, or textured glass, depending on what the frame calls for.
Storefront glazing. For Hillsboro and Beaverton business owners, a cracked or broken storefront pane needs board-up first and a permanent repair second. We handle both steps, so you are not coordinating two contractors on a job that should flow from one to the next.
Screen repair. Damaged screens can be re-splined, re-framed, or replaced depending on what the frame and mesh actually need.
Not sure which of these describes your situation? Reach out to Martin Glass and we will help you figure it out before anything is scheduled or ordered.
How the Glass Repair Process Works
Glass repair follows a consistent sequence regardless of the job type. Here is what that looks like from call to completion.
Step 1: Assessment. We look at the full picture first, frame condition, hardware, surrounding structure, and the glass itself. The assessment drives the diagnosis, and the diagnosis drives the recommendation. If repair beats replacement, that is what we tell you.
Step 2: Measurement. Every glass opening is measured on-site. We do not estimate from photos or work from standard catalog sizes. An accurate field measurement is what makes a repair fit correctly the first time.
Step 3: Fabrication. We fabricate glass in-house, which typically shortens the turnaround for most jobs. Annealed glass is cut to size at our shop. Tempered glass, which cannot be cut after the heat treatment process, is ordered to final size from the supplier. Jobs that require tempered pieces follow supplier lead times, and we give you a timeline before anything is ordered.
Step 4: Installation. The replacement glass goes in with the same care as the measurement that preceded it. We protect the work area during the install and leave the site clean when we are done. That is the standard on every job, whether it is a single IGU or a run of storefront glazing.
That consistency of craftsmanship across every job size is what we have built our reputation on in Washington County.
Repair or Replace: How We Make the Call
The goal of an honest assessment is to match the repair to what the job actually needs. We are not going to recommend a full window replacement when a new sealed unit will solve the problem. We are also not going to repair a frame that has failed structurally and is likely to cause problems again soon.
Generally, repair makes sense when the frame is structurally sound, the hardware is in working order, and only the glass or the seal has given out. Replacement typically makes more sense when the frame is damaged, when the window is too degraded to support a new IGU properly, or when the opening needs a different configuration to perform the way a homeowner needs it to.
We walk you through that assessment in plain language before you make any decisions. There is no pressure to go one direction or the other. The job is to tell you what we see, give you a fair price for what it takes to fix it, and let you decide.
Ready to Get a Straight Answer on Your Glass Repair?
If you have fogged windows, broken glass, a damaged storefront pane, or a sliding door that is not working correctly, contact Martin Glass. Our shop is at 1900 Baseline Rd, Cornelius, OR 97113. We serve Hillsboro, Beaverton, Cornelius, Forest Grove, North Plains, and the broader Washington County area.
Frequently Asked Questions
Q: What types of glass repair does Martin Glass handle in Hillsboro?
We handle failed IGU (insulated glass unit) seals, broken residential and commercial glass, sliding glass door panels, door glass replacement, storefront glazing repair, and screen repair. We serve homeowners and businesses across Hillsboro, Beaverton, Cornelius, Forest Grove, and Washington County.
Q: How do I know if I need glass repair or a full window replacement?
If your window looks fogged or hazy, that is typically a failed seal on the IGU, and the fix is generally a new sealed unit rather than new window frames. Replacement tends to make more sense when the frame itself is structurally compromised or the opening needs a different configuration to perform correctly. We give you an honest assessment before you make any decisions.
Q: How long does glass repair take in Hillsboro?
Turnaround varies by job type. Annealed glass is cut to size in our shop, which generally shortens the timeline. Tempered glass is ordered to final size from the supplier and follows the supplier's lead time. We give you a timeline before anything is fabricated or ordered, so there are no surprises.
Q: Can you replace just the glass without replacing the whole window or door?
In many cases, yes. When the frame and hardware are in sound condition, we typically replace only the glass or the sealed unit. We measure the existing opening on-site and fabricate the replacement to fit, which preserves your existing frame and avoids the cost of a full window or door replacement.
Q: How much does glass repair cost in Hillsboro?
Cost depends on the type of glass, the size of the opening, and the scope of the repair. IGU replacements, tempered glass panels, and storefront glazing each carry different material and fabrication costs. We give you a clear price before any work begins. Contact Martin Glass for a straight quote.